Study and simulation of electrical transformer protection using (differential protection)
DOI:
https://doi.org/10.58916/jhas.v7i6.592Keywords:
power system, transmission lines, differential protectionAbstract
Abstract: The continuity of electric energy and its availability provision at an appropriate price is a measure of the country’s progress, and the electric power system, which consists of generation units and networks for the transmission and distribution of electric power, requires enormous efforts and large and diverse equipment in order to deliver the electric current to the consumer in a correct and continuous manner. The electrical power system, including its components, such as generators, transformers, overhead transmission lines, and cables for transmitting and distributing electrical power, is exposed to some malfunctions that may cause the system to stop working due to a malfunction or damage to one of the elements of this system and consequently a power outage if the necessary preventive measures are not taken, and accordingly This paper presents a study on the differential protection of electrical transformers This is due to the importance of transformers in raising and lowering the voltage in the electrical power system and transferring power over very long distances from its generation sites to its utilization sites. where has been made Conducting of a simulation through the work of transformers and the causes that lead to malfunctions in these transformers, to arrive at the appropriate protection method for these transformers based on the study of the problems that caused these malfunctions.
Downloads
References
M. A. Rahman and B. Jeyasurya, “A state-of-the-art review of transformer
protection algorithms”, IEEE Trans. Power Delivery, vol. 3, pp. 534–544,
Apr. 1988.
P. M. Anderson, “Power System Protection”, Piscataway, NJ: IEEE Press,
C. D. Hayward, “Harmonic-Current Restrained Relays for Transformer
Differential Protection”, AIEE trans., vol. 60, pp 276, 1941.
M. S. Sachdev, T. S. Sidhu, H. C. Wood, “A Digital Relaying Algorithm
for Detecting Transformer Winding Faults”, IEEE Transactions on Power
Deliver, vol. 4, No. 3. July 1989.
K. Yabe, “Power Differential Method for Discrimination between Fault
and Magnetizing Inrush Current in Transformers”, IEEE Transactions on
Power Delivery, Vol. 12, No. 3, July 1997.
A.R.Van C.Warrington, “Protective Relays Their Theory and Practice”,
vol. 1, Chapman Hall Press, 3rd edition, 1985.
M. A. Rahman, Y.V.V.S. Murthy and Ivi Hermanto, "Digital Protective Relay for
Power Transformers ", U.S. Patent No. 5,172,329, December 1992.
P.K. Dash and M.A. Rahman, "A New Algorithm for Digital Protection of
Power Transformer", Canadian Electrical Association Transactions, Vol.
, Part 4, 1987, pp. 1-8, (87-SP-169), 1987.
A. Gangopadhyay, M.A. Rahman, B. Jeyasurya, "Simulation of
Magnetizing Inrush Currents in Single Phase Transformers", International
Journal of Energy Systems, Vol. 7, No. 1, 1987, pp. 34-38.
M.A. Rahman and A. Gangopadhay, "Digital Simulation of Magnetizing
Inrushes Currents in Three-Phase Transformers", IEEE Transactions on
Power Delivery, Vol. PWRD-1, No. 4, October 1986, pp. 235-242. (Over
citations)