REDUCING DRAG IN TRUCK TRAILER USING NACA PROFILE

Wanis M. Shibani1; Abdulhakim A. Abidat; Khaled S. ALwaer

doi:10.58916/jhas.v8i3.152

المؤلفون

Wanis M. Shibani1 1Mechanical Engineering, Higher Institute of Science and Technical Mesallata, Libya مؤلف
Abdulhakim A. Abidat Mechanical Engineering, Higher Institute of Science and Technical Al-Garabulli, Libya مؤلف
Khaled S. ALwaer Mechanical Engineering, Higher Institute of Science and Technical Al-Garabulli, Libya مؤلف

DOI:

https://doi.org/10.58916/jhas.v8i3.152

الكلمات المفتاحية:

Aerodynamics، CFD، Truck Trailer

الملخص

Abstract: Almost seventy percent of all goods are transported with the help of commercial vehicles with tractor-trailer combinations. Despite the fact that intensive aerodynamic studies have been taken into account for a few decades within the automotive industry. In theory the engine will only deliver fifty percent of the power to move the vehicle forward as the other fifty percent will be wasted against the significant and contrasting drag force. Computational Fluid Dynamics, often known as CFD, is a very powerful and effective tool which is used in engineering practice to find solutions to aerodynamic problems. The ANSYS Fluent (version 2016) software has been used to conduct the analysis throughout this paper and solidworks (version 2016) software to draw all model used. This article contains an in-depth study involving the usage of NACA aerofoil on the critical area of a trailer to help reduce the drag coefficient and hence exploit the fuel saving potential. Various different NACA aerofoils have been used in the study of the effectiveness of each profile for the given purpose. The best choice of NACA profile concluded from the CFD results is NACA 0012 with five parts attached to the truck trailer.

التنزيلات

تنزيل البيانات ليس متاحًا بعد.

المراجع

V. Modi, "Moving surface boundary-layer control: a review," Journal of fluids and structures, vol. 11, pp. 627-663, 1997.

S. Matěj and N. Jiří, "Aerodynamic devices to reduce the base-and underbody drag of semitrailer unit," in AED2004: sborník příspěvků 4th International Conference on Advanced Engineering Design na CD, 2004.

R. Littlewood and M. A. Passmore, "Aerodynamic drag reduction of a simplified squareback vehicle using steady blowing," Experiments in fluids, vol. 53, pp. 519-529, 2012.

V. Malviya, R. Mishra, and J. Fieldhouse, "CFD investigation of a novel fuel-saving device for articulated tractor-trailer combinations," Engineering Applications of Computational Fluid Mechanics, vol. 3, pp. 587-607, 2009.

I. S. Ali and A. A. Mahmood, "Improvement of aerodynamics characteristic of heavy trucks," in 3rd international conference on recent trends in engineering and technology, 2013, pp. 246-255.

Z. Mohamed-Kassim and A. Filippone, "Fuel savings on a heavy vehicle via aerodynamic drag reduction," Transportation Research Part D: Transport and Environment, vol. 15, pp. 275-284, 2010.

G. H. Yeoh and K. K. Yuen, Computational fluid dynamics in fire engineering: theory, modelling and practice: Butterworth-Heinemann, 2009.