Fabrication of Concrete Mixer machine

Published: 2022-09-04

Abstract

This paper describes fabricate a concrete mixer machine, which is a device that homogeneously combine cement, aggregates, and water to form concrete. This machine was designed and manufactured in the Institute of Engineering Technology, Baniwalid, Libya. It uses an electric motor with a rotational speed of 320 rpm and a voltage of 220 volts to rotate the cylinder. Maximum mixing force at 16 kg maximum mass (concrete components with cylinder mass) is 160N. Sprockets and chains were used to transfer the speed from the engine to the mixing cylinder in two stages, to reduce the rotation speed from 320 rpm to 53.6 rpm. The manufactured design showed that the concrete mixture produced is homogeneous, which indicates the efficiency of the manufactured machine in terms of mechanical performance. This project aims to localize design and manufacturing processes using reverse engineering and simulating of existing products and making them practical and sustainable in order to reduce dependence on imports and provide job opportunities for the local market.

Keywords: Concrete Mixer Machine, fabrication

How to Cite

Naser Muftah Alferjani, Abdelrazag Faraj Emhemed, Walid Aborid Abdannabi, & Masoud Omar Masoud Ajaj. (2022). Fabrication of Concrete Mixer machine . Bani Waleed University Journal of Humanities and Applied Sciences, 7(3), 278-291. https://doi.org/10.58916/jhas.v7i3.619

Issue

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

1.
Ukwuaba Samual Ifeanyi, Design of a Low Cost Concrete Mixer Machine Department of Mechanical Engineering, Petroleum Training Institute (PTI), Effurun, Nigeria, International Journal of Engineering Research & Technology (IJERT).2018.
2.
Sakshi Singh, Fabrication and Design of Efficient Concrete Mixer Machine. International Research Journal of Engineering and Technology (IRJET). 2019.
3.
Wankhede, A. K,& Sahu, A. R (2015). Design, Modification and Analysis of Concrete Mixer Machine. International Journal on Recent and Innovation Trends in Computing and Communication, 3(12), 6613-6616.
4.
Khidir, T. C. (2018). Designing, remodeling and analyzing the blades of portable concrete mixture. International Journal of Mechanical Engineering and Robotics Research, 7(6), 674.‏
5.
Ali, S. M, Khante, P. V, Babade, Aloni, S. Design And Fabrication Of Portable Concrete Mixture Machine

Similar Articles

1-10 of 30

You may also start an advanced similarity search for this article.