Wear Resistance evaluation of punching process in Bani Walid Industrial Factory

Mahmod Gomah; Mohamed Alaalam2; Abdussalam Ali Ahmed

doi:10.58916/jhas.v8i3.154

Authors

Mahmod Gomah Mechanical and Industrial Engineering Department, Bani Waleed University, Bani Walid, Libya Author
Mohamed Alaalam2 Mechanical and Industrial Engineering Department, Bani Waleed University, Bani Walid, Libya Author
Abdussalam Ali Ahmed Mechanical and Industrial Engineering Department, Bani Waleed University, Bani Walid, Libya Author

DOI:

https://doi.org/10.58916/jhas.v8i3.154

Keywords:

Blanking process, Wear, Cutting die, clearance

Abstract

Abstract: The process of punching has become prominent in the manufacturing industry because of its ability to make highly specialized parts that minimize waste and cost. With punching process, the goal is to use what is stamped/punched out rather than what is left after going through the die. In this paper, the evaluation of wear resistance and productivity of cutting die that uses to make holes in gun safety part is discussed and studied. The results of this work showed that, there is attempts by some engineers in the factory to teach a high productivity of the die, but they failed, Where the dies used had many problems, including the decrease in the toughness of the punch, and an error in the design of the punch, To solve the problems that occur in the die, which were the reason for reducing productivity, we suggest choosing other wear-resistant materials to design new dies and making a suitable design for the die by applying the shear angle and suitable clearance between the bunch and the die.

Downloads

Download data is not yet available.

References

Otto, Kevin, and Wood, Kristin. Product Design: Techniques in Reverse Engineering and New Product Development. Prentice Hall, 2000.

Ingle, K. A. Reverse Engineering, McGraw-Hill, 1994.

Chilling effects clearinghouse-www.chillingeffcts.org disclaimer/privacy

www. Reveres engineering. Com

H. James de St. Germain, Reverse Engineering utilizing domain specific knowledge, 2002.

Mahmoud M. Farag, Materials selection for engineering design, Prentice Hall. 1997.

D.T.Llewellyn and R.C.Hudd, Steels: metallurgy and applications, BH, 1998.

David A. Smith, Die design handbook, Society of manufacturing engineers, Third edition, 1990.

IVANA SUCHY, Handbook of Die design, Mc Graw Hill Companies, 1998.

George Schneider, Jr. CMfgE catting tool applications, 1991.

www.toolingandproduction.com

D. Eugene Ostergaard, Basic Diemaking, Mc Graw-Hill Book Company, 1963.

T.M.Chang Finite element simulation of the effect of clearance on the forming quality in the blanking process

G. Krauss STEELS. Heat treatment and processing principles, ASM international, November 2000.

Evaluation of ductile fracture models for different metals in blanking

http://www.metalravne.si/selector/OC100.html

http://www.metalravne.si/selector/OCR12VM.html

http://www.metalravne.si/selector/MERILO.html

Mahmod Gomah, Murat Demiral, An Experimental and Numerical Investigation of an Improved Shearing Process with Different Punch Characteristics, *Corr. Author’s Address: College of Engineering and Technology, American University of the Middle East, Kuwait, Murat.Demiral@aum.edu.kw 375Strojniški vestnik - Journal of Mechanical Engineering 66(2020)6, 375-384